DIN Standards Committee Building and Civil Engineering
Surfaces for sport areas - Synthetic turf and textile sports surfaces - Part 5: Specification for infill materials
Abstract
This document: a) specifies minimum performance and durability requirements for performance infill materials used in synthetic turf, and textile sports surfaces; b) describes how the performance of an infill shall be measured, and the results classified; c) specifies the physical and chemical properties of an infill that are to be declared in a manufacturer's product declaration; d) specifies minimum production control tolerance to ensure consistency of infill materials between production batches; e) describes how reclaimed infill is to be tested to assess its suitability for use. NOTE If requested, the procedures described in this document can also be used to assess materials intended to be used as stabilizing infills, although not all of the characteristics described in this document are required for stabilizing infills.
Begin
2021-10-21
WI
00217145
Planned document number
EN 15330-5
Responsible national committee
NA 005-01-22 AA - Synthetic surfaces (national mirror committee for CEN/TC 217/WG6 and WG 11)
Responsible european committee
CEN/TC 217/WG 6 - Synthetic surfaces primarily used outdoor
draft standard
Surfaces for sport areas - Synthetic turf and textile sports surfaces - Part 5: Specification for infill materials
2022-08
Order from DIN Media
Surfaces for sport areas - Synthetic turf and textile sports surfaces - Part 5: Specification for infill materials
2024-02
Order from DIN Media
Surfaces for sport areas - Synthetic turf and textile sports surfaces - Part 5: Specification for infill materials
2025-04
Order from DIN Media
